Click image to view full size image
Model: SCM-01, SCM-02, SR, SU, SU-C
Applications: for central heating system, widely used in hotel, swimming pool, school etc.
Solar pool heating systems will save you lots of money, and reduce reduce greenhouse gas emissions.
Pool heating is a very good solar application. The systems are simple and relatively inexpensive. Pool systems usually use simple, low cost, heat pipe or U-pipe collectors. The pool itself is the thermal storage for the system, and the pump you already use for filtering pool water will also circulate water through the solar collectors. All of this leads to inexpensive systems.
SCM-01 (Heat pipe collector)
Manifold (interior): red copper
Manifold (exterior): aluminum alloy
Glass tube dimensions: 58mm x 1.8m
Heat pipe: condenser dia14mm, body dia 8mm
Insulation: rock wool with polyurethane foam
Bracket: galvanized steel
max pressure: 12 bar
Inlet/outlet: 22mm(3/4)
Certificate: EN12975-1,2 SOLAR KEYMARK
SCM-02 (Heat pipe collector)
Manifold (interior): red copper
Manifold (exterior): aluminum alloy
Glass tube dimensions: 58mm x 1.8m
Heat pipe: condenser dia14mm, body dia 8mm
Insulation: glass fiber
Bracket: galvanized steel
Inlet/outlet: 22mm(3/4)
Certificate: EN12975-1,2 SOLAR KEYMARK
SR (Heat pipe collector)
Manifold (interior): red copper
Manifold (exterior): aluminum alloy
Glass tube dimensions: 58mm x 1.8m
Heat pipe: condenser dia 24mm, body dia 8mm
Insulation: glass fiber
Bracket: aluminum alloy
Inlet/outlet: 22mm(3/4)
Certificate: EN12975-1,2 SOLAR KEYMARK, SRCC
SU (U tube collector)
Manifold (interior): red copper
Manifold (exterior): aluminum alloy
Glass tube dimensions: 58mm x 1.8m
Distance between two tubes: 75mm
U pipe material: copper
Bracket: aluminum alloy
SU-C (U tube collector with CPC reflector)
Manifold (interior): red copper
Manifold (exterior): aluminum alloy
Glass tube dimensions: 47mm x 1.5m
Distance between two tubes: 110mm
U pipe material: copper
Bracket: aluminum alloy
| Model name | SCM12-58/1800 | SCM15-58/1800 | SCM20-58/1800 |
| number of tubes | 12 | 15 | 20 |
| Gross size(mm) | 1010*1980 (W*L) | 1235*1980 (W*L) | 1610*1980 (W*L) |
| aperture area M2 | 1.108 | 1.397 | 1.876 |
| Absorber area M2 | 0.964 | 1.199 | 1.603 |
| flat roof installation size | 1420*1010*1420mm (L*W*H) | 1420*1235*1420mm (L*W*H) | 1420*1610*1420mm (L*W*H) |
| weight empty (KG) | 40.7 | 56 | 64.4 |
| fluid volume( L) | 0.8 | 1 | 1.37 |
| Heat transfer medium | pure water/glycol | pure water/glycol | pure water/glycol |
| working pressure | 6 bar | 6 bar | 6 bar |
| Max testing pressure | 12 bar | 12 bar | 12 bar |
| Max working temperature | 280°C | 280°C | 280°C |
| efficiency n° | 0.788 | 0.79 | 0.795 |
| inlet/outlet connection | 22mm | 22mm | 22mm |
| manifold packing mm | 1*2000*200*160 | 1*2000*200*160 | 1*2000*200*160 |
| tubes packing mm | 1*1940*280*270 | 1*1940*350*270 | 2*1940*350*180 |
| certificate | EN12975-1,2 SOLAR KEYMARK | EN12975-1,2 SOLAR KEYMARK | EN12975-1,2 SOLAR KEYMARK |
| Material | |||
| vacuum tube | high borosilicate glass | ||
| size | 58*1800mm | ||
| coating | SS-CU-AIN/ALN | ||
| heat pipe material | TU1 copper | ||
| heat pipe length | 1790mm | ||
| heat pipe diameter | condenser dia14mm, body dia 8mm | ||
| manifold header pipe | TP2 copper dia 35mm | ||
| manifold casing | anodized aluminum alloy | ||
| insulation | rock wool with polyurethane foam | ||
| bracket | galvanized steel | ||
| tube holder | UV stabilized nylon | ||
| seals | silicon seal | ||
| contact sheets | aluminum fin | ||
